|
Slugger Holemaker 19040
MSRP: $699.95
Fabtool Price: $629.95
You Save: $70.00 (10 %)
Manufacturer: Jancy Engineering Inc.
Manufacturer Part No: 19040
|
|
Only 3 Left. The Holemaker has been replaced by the Holemaker II.
We are ofering our remaining stock of Holemakers at a special price.
A powerful small drill, the Holemaker packs an unexpected punch in a compact 30-pound, 15" high by 7" wide package. Uses 3/4" Shank Slugger annular cutters.
•Compact size • Only 15" high by 7" wide. Lightweight at only 30lbs.
•External coolant system.
•Easily converts to accept twist drills up to 1/2" capacity.
•1-3/8” diameter through 2” material.
| Specifications
|
| Arbor Bore
|
3/4" (19.05mm)
|
| C/L spindle to magnet face
|
1.9" (48.5mm)
|
| C/L spindle to motor face
|
1.3" (33mm)
|
| Cutter depth of cut (maximum)
|
2" (50mm)
|
| Cutter diameter (maximum)
|
1-3/8" (35mm)
|
| Drill point breakaway
|
1095lbs on 1" plate
|
| Height
|
15" minimum (381m)
|
| Length (including handle)
|
12" (305mm)
|
| Magnet base dimensions
|
3-1/3" x 6-2/3" (84mm x 168mm)
|
| Magnet dead lift
|
2350lbs. On 1" plate
|
| Motor
|
1.4 HP 1050W (single phase) 120V / 10.2 ~ 240V / 5.1A 350 RPM (load)
|
| Weight
|
30lbs. (13.7kg)
|
| Width
|
15" minimum (381m)
|
|
MSRP: $39.95
Fabtool Price: $39.00
You Save: $0.95 (2 %)
The Magbrush from Jancy Engineering is a handy magnetic cleanup tool. Simply slide the Magbrush over the area to be cleaned up and the internal magnets will pick up all of the ferrous material. Then simply pull out the knob and the material will fall off
|
|
MSRP: $89.29
Fabtool Price: $89.00
You Save: $0.29 (0 %)
Heavy Duty Chuck and Adapter for Slugger Holemaker.
| |
|
|
|